Make work moreconvenient!Try one of these heat shrink tubes to repair your broken wires.This is abetter alternative for electrical tapessince it performs apermanent fix to any kind of external damageof your cable wires.
It willneatly seal the area of the damaged cableyou wished torepair effortlessly. This isNot exclusively for repairs, It can also be used as aprevention for over-bended wires.
The inner layer of adhesive withsuperior sealing capabilityis also abuffer against mechanical strain. Dual wall heat shrink tubing isdesigned to provide superior sealingagainst water, corrosive gas and chemicals.
Long Service Life
High Strength Toughness
Good Electrical Insulation
Material: Environmental Polyolefin
Retraction ratio for these shrink tube is 2:1 (willshrink to 1/2 of its diameter supplied).
Minimum Shrinkage Temp: +70℃
Full Shrinkage Temp: +110℃ maximum
Operating Temperature: -55℃ to + 125℃
Dielectric strength: 15 kV / mm
If youuse lighter or candleto heat up the tube, please make sure that the flame is atleast 1 cm away from the tube,or the flame may lead toblack marks on the tube,which not onlyimpair its appearance,also may burn your electric wire.
1 Set x 328pcs (8 Sizes) 2:1 Heat Shrink Tubing
(Quantity x Supplied Internal Diameter x Single Length) 120pcs x φ1.0 x 40mm (Yellow,Black,Red,Green) 60pcs x φ2.0 x 40mm (Yellow,Black,Red,Blue) 32pcs x φ3.0 x 40mm (Yellow,Black,Red,Green) 32pcs x φ4.0 x 40mm (Yellow,Black,Red,Blue) 32pcs x φ6.0 x 40mm (Yellow,Black,Red,Green) 20pcs x φ8.0 x 80mm (Yellow,Black,Red,Blue) 16pcs x φ10.0 x 80mm (Yellow,Black,Red,Green) 16pcs x φ14.0 x 80mm (Yellow,Black,Red,Blue)